Handmade Crochet Baby Jewelry: Adorable, Soft, And Safe

Crocheted baby jewellery is a fun, quick, and easy project for crafters of all skill levels. You can make a pair of earrings, a bracelet, or a necklace with just a small amount of yarn or thread. These projects are perfect for using up scrap yarn and can be made and gifted within a day.

Crocheted baby jewellery is also a great option for those who want to wear their crocheted creations during the summer. You can even crochet teething necklaces for babies using non-toxic, natural materials such as cotton yarn and wooden beads.

There are plenty of free patterns available online for crocheted earrings, bracelets, and necklaces, so you can create a whole range of stylish and functional accessories.

Crochet baby bracelets

There are many different stitches and techniques that can be used to create a variety of crochet baby bracelet designs. For example, the single crochet stitch is a very simple design as it only uses single crochet stitches. You can start by making three chains and keeping a single crochet into the second stitch and the vertical loop that follows. When you reach your desired length, start chaining stitches from the second loop. You will then be able to tie the bracelet around your wrist using the chains on each side.

Another simple stitch is the shell stitch, which is one of the best beginner-friendly patterns. All you need to do is single crochet and chain two, and then single crochet again. This design is perfect when you need to make multiple bracelets.

If you're feeling more adventurous, you can try the slanted puff stitch, which is a really fun stitch to crochet. You will need to yarn over before and after inserting your hook into the next chain, and then repeat this three times into the same chain. You'll end up with seven loops on your hook, which you then pull the yarn through to close the stitch.

For a more delicate and detailed design, you can use the half double crochet and single crochet stitches to create a beautiful bracelet that goes with any outfit.

When making crochet baby bracelets, it's important to use the right materials. Cotton yarn is a good option, but you can also use whatever yarn is accessible to you. You will also need a crochet hook, preferably no smaller than 4mm, and a needle with a small enough eye to fit through the holes in the button.

You can also add beads to your crochet baby bracelets. To make a beaded bracelet, you will need to work in front loops only when adding a new bead, and the only stitch you'll use is the slip stitch. This is a fun project to do with kids, and you can even use beads with letters to play a spelling game at the same time.

So, whether you're a beginner or an experienced crocheter, making crochet baby bracelets is a fun and rewarding project that can be completed in no time!

Crochet baby necklaces

Materials and Tools:

• Yarn: Choose soft and non-toxic yarn, such as cotton yarn, in a variety of colours. You can opt for sport-weight or DK-weight cotton yarn, depending on your desired thickness.
• Beads: Wooden beads in various sizes, such as 3/4 inch and 1 inch, can be used as teething elements or decorative accents.
• Crochet Hook: A size G crochet hook is commonly used for baby necklace projects.
• Tapestry Needle: This tool is useful for weaving in yarn ends and adding decorative details.
• Other Findings: Depending on your design, you may need jump rings, clasps, ribbons, or other jewellery findings.

Basic Techniques:

• Magic Ring: The magic ring is a common technique used to create a centre ring for crocheting in rounds. It's perfect for starting pendants or bead covers.
• Single Crochet (SC): Single crochet stitches are a basic stitch used in many baby necklace patterns.
• Crocheting Around Beads: To create bead covers, you'll crochet around the beads using single crochet stitches, increasing and decreasing as needed to fit the bead snugly.
• Assembly: Baby necklaces can be assembled in various ways, such as stringing beads on yarn, braiding yarn, or using ribbon. You can also add clasps or ties for adjustable lengths.

Design Ideas and Patterns:

• Nursing Necklace: A nursing necklace is a functional accessory for breastfeeding mothers, providing a safe and engaging distraction for fidgety babies. You can crochet around wooden beads to create a teething element and add colourful yarn for visual appeal.
• Crocheted Bead Necklace: Create colourful bead covers by crocheting around wooden beads and stringing them together. You can use multiple colours and vary the number of beads for different designs.
• Chevron Necklace: This pattern creates a trendy chevron design using chain stitches and contrasting colours. It's a fun way to add a handmade touch to any outfit.
• Wild Irish Rose Necklace: Delicate and elegant, this necklace features small and large flower motifs with pearl beads. It's an intermediate-level project that adds a touch of nature-inspired beauty.
• Loopy Necklace: Loopy necklaces are simple yet eye-catching. You can create loops with chained yarn and cover them with additional yarn for a polished look.
• Chokers: Crochet chokers offer a stylish and elegant look. You can find patterns for bridal chokers with lace details or unique designs like the Anzac Poppy Choker, perfect for remembrance occasions.

Crochet baby earrings

Crocheted baby earrings are a fun and simple project that can be made as a gift or to sell at craft markets. They are also a great way to express yourself and dress up your style. The best type of yarn to use for crochet baby earrings is crochet thread, which is a special type of thin yarn used for making fine crochet projects. When making crocheted baby earrings, it is important to use a small hook size, such as a 2.5 mm hook or a size B crochet hook, to ensure that the earrings do not turn out too large.

There are many different patterns and styles of crochet baby earrings that you can create. Here are some ideas to get you started:

Basic Crochet Earrings:

This pattern is perfect for beginners and can be made with any type of yarn or thread. You will need a small amount of yarn or thread, a crochet hook, and a pair of earring findings.

Flower Earrings:

These cute flower earrings can be made by crocheting a simple flower pattern and attaching it to an earring finding. You can use any type of yarn or thread in your favorite color.

Boho-Style Earrings:

Create a pair of boho-style earrings by crocheting a simple pattern with a fun and funky yarn or thread. You can add beads or other embellishments to give them a unique touch.

Beaded Earrings:

For a more delicate and elegant look, try crocheting with a fine yarn or thread and adding small beads to your design. You can use a variety of bead colors and sizes to create a unique pair of earrings.

Holiday-Themed Earrings:

Get into the holiday spirit by making a pair of crocheted baby earrings in festive colors. You can create snowflakes, pumpkins, or heart-shaped earrings for a fun and festive look.

When making crochet baby earrings, it is important to consider the weight and texture of the yarn or thread you are using. Lighter weight yarns or threads, such as lace weight or sport weight, will create more delicate and airy earrings. Heavier weight yarns or threads, such as worsted weight or bulky weight, will result in more substantial and sturdy earrings.

You can also experiment with different colors, textures, and stitch patterns to create unique and personalized baby earrings. Get creative and have fun with your crochet projects!

Crochet baby booties

For those looking for a more modern twist, there are plenty of gender-neutral patterns available. These can be made in a whole range of colours, from neutrals to bright and bold shades.

There are also a number of crochet jewellery patterns available online, including necklaces, bracelets and earrings. These are usually super quick to finish and can be made and gifted, or sold, in a day.

Crochet baby beanie

Materials:

• Bernat Baby Blanket yarn in any colour of your choice (you can substitute it with any super chunky, size 6 yarn of the same gauge)
• Size N/P (10mm) crochet hook
• Tapestry needle to weave in the ends (you can also use a smaller hook)
• Stitch markers
• Scissors

Abbreviations:

• Sc – single crochet
• Hdc – half double crochet
• BLO – back loop only

Instructions:

• Two options are given for Round 1 with or without a magic ring. Choose whichever one you are comfortable with.
• If you start with a magic ring, take special care to weave in the beginning tail securely, going back and forth at least three times. You don't want your magic ring to open up and make your hat fall apart.
• If you work your first round without a magic ring, you might have to use the beginning tail to close any holes left on the crown before weaving in the rest of the tail.
• The first three rounds are common for all four sizes. After working on those, proceed to Round 4 for the size you are making.

Round 1 (with magic ring):

Make a magic ring and work eight sc into it, close the ring, do not sl st and do not turn.

Round 1 (without magic ring):

Ch three, two sc into the second ch from the hook, four sc into the next ch, you will now end up below your foundation chain, two sc into the next free loop of the foundation chain, do not sl st and do not turn.

Round 2:

2 sc in the next st (the first st of Round 1), place a marker in the first st you just made, 2 sc in the next seven sts until you end in the st before the marked one, do not sl st and do not turn.

Round 3:

1 sc in the next marked st, move the marker up into the first st you just made, 2 sc in the next * (1 sc in the next st, 2 sc in the next), repeat from * until you end in the st before the marked one, do not sl st and do not turn.

Round 4:

1 sc in the next marked st, move the marker up into the st you just made, 1 sc in each st across until you end in the st before the marked one, do not sl st and do not turn.

Repeat Round 4 three more times until your hat is 4.5 inches tall. Do not fasten off yet. Fold your hat flat. I found that it lays flat in some directions more than others. Experiment to find the best fold, so it becomes easy to attach the ears.

Last Round:

Sl st to the BLO of the next st on the side fold, ch 1, 1 sc in the BLO of the same st as ch 1, 1 sc in the BLO of each st across to the end, sl st to the first sc. Fasten off.

Ears (make two):

Row 1:

Ch three, 2 sc in the second ch from the hook, 2 sc in the next ch, turn.

Row 2:

Ch 1, 2 sc in the same st as ch 1, 2 sc in the remaining three sts, fasten off with a 15-inch tail for sewing.

Thread the long tail left on the ears and run your needle in and out through the straight base of the ear, pull to cinch. The tighter you pull, the smaller your ears will look. Repeat with the other ear.

Place both the ears along the sides of the hat and find the position you like best. Sew them along the fold of the hat on either side.

Make sure you read the pattern notes given at the beginning of the pattern and then weave in any tails left.

Frequently asked questions